A new racer 9

 

  

The deck carlings installed , and the frames notched for the side battens that will back up the plank seams.

   

In the foreground are the roughed out planks .All of the planking was cut out of two inch thick stock and then the planks were re-sawn to make a port and starboard for each strake .

After the planking is complete , the screw holes are plugged with plugs cut from the corresponding plank scraps , and the planking faired with a spoke shave , followed by a straight line sander . The next step is to plane down the sheer and start on the deck framing .

 

   

  Back Next
A new racer 1 A new racer 2 A new racer 3 A new racer 4 A new racer 5 A new racer 6 A new racer7 A new racer 8 A new racer 9 A new racer 10 A new racer 11 A new racer 12 A new racer 13 A new racer 14 A new racer 15 A new racer 16 A new racer 17 A new racer 18
Designs

Home 30 foot Hackercraft Jacks Ditchburn Allouette The family Seabird Lindsay Dispro Crusoe 1937 Ditchburn A New Runnabout Waterford dispro A new Racer Gentlemans Racer Old Poke The Witch Hawkstone A New Dispro Lady Patricia 1 New Link Bar https://www.facebook.com/pages/Windsor-Boat-works-limited/185510771500093

 

 
Send mail to windsor@muskoka.com with questions or comments about this web site.
Copyright 2003 Windsor Boat works limited
Last modified: 04/10/05