setting up 1

Home 30 foot Hackercraft Jacks Ditchburn Allouette The family Seabird Lindsay Dispro Crusoe 1937 Ditchburn A New Runnabout Waterford dispro A new Racer Gentlemans Racer Old Poke The Witch Hawkstone A New Dispro Lady Patricia 1 New Link Bar https://www.facebook.com/pages/Windsor-Boat-works-limited/185510771500093

 

The shop was cleared out , and all of the frames and stringers were rounded up . I used two wood I beams level in both directions for a strong back

The stringers were notched at precise locations to mate into matching notches in the frames .

During the assembly of the frames a temporary cross member was fastened to each frame and the center line marked on it before the frames were taken off of the mylar drawing .This common reference plane is the key to knowing where the frames will go .

Back Next

Home Up Planning The frames : Frames 2 : setting up 1 setting up 2 chines inner skin 1 innerskin2 bottom planks 1 bottom planks 2 rollover The Sides 1 The Sides 2 Planking the sides1 Planking the sides2 floors The Bow The Deck 1 The Deck 2 The Deck 3 The transom fairing the sides The engines arrive Decking Prop shafts Interior 1 Interior 2 Interior 3 Interior 4 Archimedes The gunwales The parts staining the hull Interior 5 Hardware 1 Hardware 2 Hardware 3 Interior 6 Interior7 Interior8 Hardware 4 Sea trials 1 Sea trials 2 Departure 

 

Send mail to windsor@muskoka.com with questions or comments about this web site.
Copyright 2002 Windsor Boat works limited
Last modified: 04/19/03