The screw holes in the sides are plugged with plugs cut out of the corresponding
plank scraps of the planks that they are going into . Not really much to do with
the deck , but I thought I'd put it in here anyway .
The sheer is planed down until it is a fair and eye sweet line with the correct
bevel and the same on both sides . The inside of the side planking was sealed
with four coats of clear sealer while it is easy to get at . The sub-floor
was sealed on the underside before being placed as well . In the end there will
be no uncoated wood anywhere in the boat . The deck carlings have been laid out
and are ready to be fitted .
