The parts

Home 30 foot Hackercraft Jacks Ditchburn Allouette The family Seabird Lindsay Dispro Crusoe 1937 Ditchburn A New Runnabout Waterford dispro A new Racer Gentlemans Racer Old Poke The Witch Hawkstone A New Dispro Lady Patricia 1 New Link Bar https://www.facebook.com/pages/Windsor-Boat-works-limited/185510771500093

     

While the hull is being readied for stain the entire interior has been dismantled for stain and ten to twelve coats of varnish on every part , hand sanded between coats with # 400 waterproof sandpaper . The parts are often more work than the boat itself . I haven't counted how many parts , but so far I've used over forty quarts of varnish

    

 

On most modern boats the hydraulic steering pump gets bolted onto the dash , and the steering wheel goes directly on the pump . This might look O.K. on a Tupperware boat , but not here . I had a welder make up this bracket to hide the pump behind the bulkhead and use a more traditional looking  steering column .

Back Next

Home Up Planning The frames : Frames 2 : setting up 1 setting up 2 chines inner skin 1 innerskin2 bottom planks 1 bottom planks 2 rollover The Sides 1 The Sides 2 Planking the sides1 Planking the sides2 floors The Bow The Deck 1 The Deck 2 The Deck 3 The transom fairing the sides The engines arrive Decking Prop shafts Interior 1 Interior 2 Interior 3 Interior 4 Archimedes The gunwales The parts staining the hull Interior 5 Hardware 1 Hardware 2 Hardware 3 Interior 6 Interior7 Interior8 Hardware 4 Sea trials 1 Sea trials 2 Departure 

 

Send mail to windsor@muskoka.com with questions or comments about this web site.
Copyright 2002 Windsor Boat works limited
Last modified: 04/19/03